Avocent HMX 1050, Installer/User Manual

Page: 72 / 100

68
HMX Extender System Installer/User Guide
Table 5.1: SAMI Parameters and Descriptions
Parameter Description Type Example
password The password initiates a management session.
Once the session is initiated, any other
commands may be used. The session will close
when the time-out expires. The password can
only be set using the serial port. use use password
sessionpassword resp
connect
reset The reset parameter resets a user station.
There are certain cases where the user station
must be reset for the parameter to take effect. use use reset
disconnect The disconnect parameter disconnects the
manager from the user station. There is no
response to this message. use use disconnect
ipaddr IP address of the managed device. Changing
ipaddr requires a use reset command after the
response is received to be active. set, get set IpAddr 192.168.13.1
resp IpAddr 192.168.13.1
get IpAddr
resp IpAddr 192.168.13.1
netmask Netmask of the managed device. Changing
netmask requires a use reset command after
the response is received to be active. set, get set netmask 255.255.255.0
resp netmask 255.255.255.0
get netmask
resp netmask 255.255.255.0
gateway Default gateway of the managed device.
Changing gateway requires a use reset
command after the response is received to be
active. set, get set gateway 192.168.13.1
resp gateway 192.168.13.1
get gateway
resp gateway 192.168.13.1
partneripaddr The IP address of the partner. This parameter
only applies to the user station. It is the IP
address of the transmitter that the user wants to
connect to. There is a slight delay to switch
partners, but no reset is needed. set, get set partnerIpAddr
192.168.13.2
resp partnerIpAddr
192.168.13.2
get partnerIpAddr
resp partnerIpAddr
192.168.13.2
name The user station name of the device.
No reset is needed. set, get get name
resp name “Malta DIP”
set name “Malta DIP”
resp name “Malta DIP”
eid The user station EID of the device. get get eid
resp eid 510150-00032D-000
set eid 510150-00032D-000
resp eid 510150-00032D-000
mac The mac address of the device. get get mac
resp mac 00:E0:86:0E:31:73