Avocent HMX 1050, Installer/User Manual

Page: 63 / 100

Chapter 3: Operations
57
2. Press
2
to access the OSD Inactivity Timer and press Enter .
Figure 3.37: OSD Inactivity Timer Menu
3. Press
2
to choose Inactivity Time and press
Enter
. You will be prompted to enter a time-out
period in the format hours:minutes (HH:MM). The maximum time-out period you can enter is
9 hours and 59 minutes (09:59).
4. Enter the time-out period and press
Enter
.
5. To confirm your selection and exit the screen, type 0 (zero) and press Enter .
NOTE: To disable the OSD time-out, choose Disable in the OSD Inactivity Timer Menu.
Audio Performance Settings
You can use this option to modify the audio performance settings or to disable audio support. There
are three settings available: high, medium and off. The high setting provides the best audio
performance and should be used when high network bandwidth is available. The medium setting
should be used if network bandwidth is limited or if the network latency is high. If you choose
off,
audio support will be disabled.
NOTE: To ensure that audio operates correctly, configure the user station and the transmitter with identical audio
performance settings.
To change the audio performance setting for the transmitter:
1. From the serial menu, press
2
to access the Transmitter Main Menu and press
Enter
. If the
password option is enabled, you will be prompted for a password.
2. Press
8
to access the Console Settings Menu and press
Enter
. The current audio performance
setting is displayed beside menu item 3.