Avocent AV Works, Installer/User Manual

Page: 37 / 144

Chapter 3: AVWorks Explorer 25
2. Select View - Properties from the Explorer menu.
-or-
Click the
Properties task button.
-or-
Right-click on the unit. Select
Properties from the pop-up menu.
The Properties dialog box appears.
3. Click the Network tab.
4. In the Address field (appliances only), enter the appliance address in IP dot notation or 1-128
character host name. The address cannot be blank, a loopback address or all zeros. Duplicate
addresses are not allowed.
5. In the Browser URL field, enter a 1-256 character URL for establishing a browser connection.
6. Click another tab to change additional properties.
-or-
If finished, click
OK to save the new settings.
-or-
Click
Cancel to exit without saving the new settings.
Viewing and changing information properties
Information properties include descriptive, contact and comment information; these fields may
contain any information you require.
To view or change information properties:
1. Select an appliance or device in the Unit list.
2. Select
View - Properties from the Explorer menu.
-or-
Click the
Properties task button.
-or-
Right-click on the unit. Select
Properties from the pop-up menu.
The Properties dialog box appears.
3. Click the Information tab. You may enter any information in the following fields.
a. In the Description field, enter 0-128 characters.
b. In the Contact field, enter 0-128 characters.
c.
In the Contact Phone Number field, enter 0-64 characters.
d. In the Comments field, enter 0-256 characters.
4. Click another tab to change additional properties.
-or-
If finished, click
OK to save the new settings.
-or-
Click
Cancel to exit without saving the new settings.