Avocent AV Works, Installer/User Manual

Page: 100 / 144

88 AVWorks Installer/User Guide
To add or modify a user:
1. Click the Settings tab in the CCM AMP.
2. Select the Users category.
3. To add a new user, click the Add button. The Add User dialog box appears.
-or-
To modify a user, select the name and then click the
Modify button. The Modify User dialog
box appears.
4. When adding a user, enter the 3-16 character username in the Name field. Spaces are not allowed.
5. Enter a 3-16 character password in the Password field. Spaces are not allowed. Verify the pass-
word by typing it again in the Verify Password field.
6. Select the appropriate access level from the pull-down menu. If you select User , the Access
Rights button appears.
a.
To select individual device access for the user, click the Access Rights button. The User
Access Rights dialog box appears.
b. To add access to a device, select a device in the left (No access to) column. Click the
Add button.
c. To remove access to a device, select a device in the right (Allow access to) column. Click
the
Remove button.
d. Repeat steps b and c until the right (Allow access to) column represents the appropriate
device access for this user, and then click OK .
7. To configure a user’s public SSH key:
a. Enter a 1-1024 character key in the Key Text field.
-or-
Click the
Browse button to navigate to the path/filename containing an SSH key. The
public key contained in the selected file will appear in the Key Text field.
-or-
Click the
Create button.
b. The Create SSH Key Pair dialog box appears. The Identity File field contains the private
key filename and path. You may click the Browse button to specify a path and filename
Configure port settings Yes No No
Monitor device status Yes Yes No
Issue break signal Yes Yes Yes
Access device(s) Yes Yes Assigned by Admin
Table 7.1: CCM Appliance Access Levels (Continued)
Operations
Appliance
Administrator User
Administrator
User