Avocent AV Works, Installer/User Manual

Page: 107 / 144

Chapter 7: CCM AMP 95
4. In the Name field, enter the system’s 0-255 character fully qualified domain name. In the
Contact field, enter 0-255 characters of contact information.
5. In the Community Names area, enter the 1-64 character Read, Write and Trap community
names. These specify the community strings that must be used in SNMP actions. The Read and
Write strings only apply to SNMP over UDP port 161 and act as passwords that protect access
to the appliance.
6. In the Allowable Managers area, specify up to four SNMP management entities to monitor this
appliance, or leave this area blank to allow any station to monitor the appliance.
To add an Allowable Manager:
a.
Click the Add button. The Allowable Manager dialog box appears.
b. Enter the IP address of the management station.
c.
Click OK to add the management station.
To modify an Allowable Manager:
a.
Select an entry in the Allowable Managers list, then click the Modify button. The
Allowable Manager dialog box appears.
b. Modify the entry as needed.
c.
Click OK to save the change.
To delete an Allowable Manager:
a.
Select an entry in the Allowable Mangers list, then click the Delete button. You will be
prompted to confirm the deletion.
b. Click Yes to confirm the deletion.
7. In the Trap Destinations area, specify up to four SNMP trap destinations to which this
appliance will send traps.
To add a trap destination:
a.
Click the Add button. The Trap Destination dialog box appears.
b. Enter the IP address of the trap destination.
c.
Click OK to add the trap destination.
To modify a trap destination:
a.
Select an entry in the Trap Destinations list, then click the Modify button. The Trap
Destination dialog box appears.
b. Modify the entry as needed.
c.
Click OK to save the change.
To delete a trap destination:
a.
Select an entry in the Trap Destinations list, then click the Delete button. You will be
prompted to confirm the deletion.
b. Click Yes to confirm the deletion.