manualshive.com logo in svg

Avocent AUTOVIEW 3008, Installer/User Manual, Page: 65 / 112

Share
Download
Avocent AUTOVIEW 3008 Installer/User Manual Download Page 65

 Chapter 4: Web Interface Operations        

53

AVRIQ versions 

The AVRIQ Versions sub-category allows you to view version information for attached AVRIQ 
modules. Clicking on the EID displays a window that allows you to upgrade the IQ module 
firmware and to reset the IQs if connected to a cascaded device. 

Selecting the Enable Auto-Upgrade for all IQs checkbox causes all subsequently connected IQ 
modules to have their firmware upgraded to what is available on the AutoView switch. This 
guarantees that IQ module firmware is compatible with AutoView switch firmware. 

When you select the 

Versions

 category, the OBWI will retrieve the firmware versions from the 

selected switch. The AVRIQ Versions sub-category allows you to view and upgrade all of the IQ 
modules and IACs in the system.

On occasions when a cascaded switch is not recognized by the AutoView switch, it may be 
necessary to reset the IQ module which connects the cascaded switch to the AutoView switch. This 
can be done using the Reset IQ module button in the IQs sub-category.

To view version information for AVRIQ modules:

1.

Click the 

Configure

 tab in the OBWI, then click 

Versions - AVRIQ Versions

 in the left column.

Figure 4.11: AVRIQ Versions Window

2.

Click the EID of the AVRIQ module for which you want to view the firmware version.

Summary of Contents for AUTOVIEW 3008

















































































































Reviews:

No comments