Avocent AUTOVIEW 3008, Installer/User Manual, Page: 64 / 112

52 AutoView 3008/3016 Switch Installer/User Guide
To configure a cascaded switch connection:
1. Click the Configure tab in the OBWI, then click Servers-Cascade Devices in the left column.
2. Click the name of the switch you want to configure and type the new name for the cascaded
device.
3. Type the number of channels, between 4-24, for the switch.
4. When you have finished configuring the switches, click Save to save the new settings.
-or-
Click Cancel to exit without saving.
Viewing version information
The Versions category displays versions of the AutoView switch, FPGA and ASIC firmware.
When you select the Version sub-category, the OBWI will retrieve the firmware versions from the
selected AutoView 3008/3016 switch. This read-only information displays the version information
for the unit itself. The AVRIQ Versions sub-category allows you to view and upgrade all of the IQ
modules in the system.
Figure 4.10: Versions Window