Avocent AUTOVIEW 3008, Installer/User Manual, Page: 108 / 112

96 AutoView 3008/3016 Switch Installer/User Guide
For example: For
Stop + A
, press and hold
Ctrl+Shift+Alt
and press
Scroll Lock
, then
F1 + A
.
These key combinations will work with the serial USB IQ module (if your Sun system comes with
a USB port) as well as the Sun VSN and WSN IQ modules. With the exception of
F12
, these key
combinations are not recognized by Microsoft Windows. Using
F12
performs a Windows key
press.
When finished, press and hold
Ctrl+Shift+Alt
and then press the
Scroll Lock
key to toggle Sun
Advanced Key Emulation mode off.
Special considerations for Japanese Sun USB and Korean Sun USB
keyboards (USB IQ modules only)
Japanese Sun USB and Korean Sun USB keyboards assign usage IDs for certain keys that differ
from standard USB usage IDs. If USB IQ modules are attached to your Sun servers, the Han/Zen
and Katakana/Hiragana keys on Japanese Sun USB keyboards and Hangul and Hanja keys on
Korean Sun USB keyboards must be accessed using alternate keystrokes.
Due to these keyboard-specific differences, keyboard mapping inconsistencies may be encountered
when switching between target devices using Sun VSN and WSN IQ modules and target devices
using USB IQ modules. These keys function normally if your Sun servers are attached to the
AutoView 3008/3016 switch using a VSN or WSN IQ module.
Table E.2 lists the keyboard mapping that will take place when a USB IQ module is used in
this setting.
Table E.2: PS/2-to-USB Keyboard Mappings
PS/2 Keyboard USB Usage ID Sun USB Keyboard
Korean Sun USB
Keyboard Japanese Sun USB
Keyboard
Right-Alt 0xE6 AltGraph Hangul Katakana/Hiragana
Windows Application 0x65 Compose Hanja Compose
Hangul 0x90 N/A N/A N/A
Hanja 0x91 N/A N/A N/A
Katakana/Hiragana 0x88 N/A N/A Han/Zen
Han/Zen 0x35 ` ~ ` ~ N/A