The Power of Being There
™
¯
www.avocent.com
76
The Menu Bar
If you want to add/remove more than one column, or if you want to change the sequence of the
columns, you can click the Configure Columns... command at the bottom of the pop-up menu.
Or, click on the
icon in the Software Asset Report window. Either of these actions will open
the Configure Columns dialog box shown above. To remove an existing column, select it from
the list on the right, then click the Remove button. To add a column, select it from the list on
the left, then click the Add button. Or use Add All or Remove All if you want to add or remove
all of the items.
To re-arrange the column sequence using the Configure Columns dialog box, click on the
desired column name on the right side of the dialog box, then click the Up or Down button to
move it up or down in the sequence (that is, to move it left or right within the table).
Alternatively, you can re-arrange the column sequence manually. To do so, place the mouse
pointer within the desired column heading, press and hold the left mouse button, then drag-and-
drop the column to the left or to the right.
If you only want to add one column or remove one column of data from the
report, the pop-up menu shown at left is convenient. Right-click anywhere
within the table listing the software data, in the Software Asset Report, to
open this pop-up menu. The currently selected columns are indicated by a
checkmark on the menu.
To remove a column using this menu, simply click on the item you want to
remove. The menu will close and the column will be removed from the
Report window immediately.
Likewise, to add a column, click on the related item on the pop-up menu.
The menu will close, and the new column of data will be added.
