Avocent AdminWorks 1.2 User
’
s Manual
¯
July 2005
The Menu Bar
39
Event Properties
To view a description of the missing or replaced hardware, select the desired entry in the log,
then click the Event Properties icon (
). The Event Properties dialog box will appear.
You can also select a different status for this entry in the Status drop-down list
(Acknowledged, Warning, and Unknown). An example is shown below.
The Hardware Change Log provides an additional drop-down list, at the right side of the dialog
box, which is not available in the other three logs. It lets you further filter the entries displayed.
If you select a particular System Name from this drop-down list, only the entries related to that
system will be displayed in the Hardware Change log.
Deleting all entries in any of the Logs
After opening a log, you can optionally delete all entries currently in the log by clicking the Clear
icon (
) above the table. You can also clear a log even without opening it. When the four log
names are listed in the table, click on the desired log name in the table to select it, then click
the Clear button. A message will appear and require you to confirm the operation.
