Avnet Zynq-7000 AP SoC Getting Started Manual Download Page 19

Page: 19 / 21

Version 1.2

Zynq

-7000 AP SoC / Analog Devices Intelligent Drives Kit II

Figure 16 - Source Image File Selected

13. (Optional) Verify the integrity of the extracted image file using the Win32 Disk Imager

MD5 Hash

tool by clicking

on the checkbox option. The checksum calculation may take a few minutes.

14. Click the

Write

button to begin writing the source image file contents to the SD card. The SD imaging process

can take around 20 to 30 minutes to complete the 8GB transfer.

15.

Use Windows “safely remove” to eject the SD card.

Figure 17 - Windows “safely remove” to eject the SD card

This concludes the procedure of re-imaging the SD card. Return to the beginning of this document for
instructions on preparing and running the design.

C:/work/ 2014_R2-2015_04_24.img

Summary of Contents for Zynq-7000 AP SoC






















Search results

Summary of Contents for Zynq-7000 AP SoC

Reviews:

Related manuals for Zynq-7000 AP SoC

Brands by name

Popular brands

Avnet Zynq-7000 AP SoC, Getting Started Manual

Search results

Summary of Contents for Zynq-7000 AP SoC

Reviews:

Related manuals for Zynq-7000 AP SoC

Brands by name

Popular brands