Avnet COM Express MSC C6B-SLH User Manual Download Page 108

Page: 108 / 144

MSC C6B-SLH

MSC C6B-SLH User Manual

108 / 144

Feature

Options

Description

RAID1

Enabled, Disabled

Enable Disable Raid 1 feature

RAID10

Enabled, Disabled

Enable Disable Raid 10 feature

RAID5

Enabled, Disabled

Enable Disable Raid 5 feature

Intel Rapid Recovery

Enabled, Disabled

Enable Disable Rapid Recovery Feature



NOTE: Intel® Rapid Recover Technology is a feature of Intel®

Rapid Storage Technology (Intel® RST). It uses RAID 1 (mirroring)
functionality to copy data from a designated master drive to a
designated recovery drive

OROM UI and Banner

Enabled, Disabled

If enabled, then the OROM UI is shown. Otherwise no OROM
banner or information will be displayed if all disks and RAID
volumes are normal

IRRT Only on eSATA

Enabled, Disabled

If enabled, then only IRRT volumes can span internal and eSATA
drives. If disabled, then any RAID volume can span internal and
eSATA drives.

Smart Response Technology

Enabled, Disabled

Enable or Disable Smart Response Technology.



NOTE: Intel® Smart Response Technology is a feature of

Intel® Rapid Storage Technology (Intel® RST) that enables either a
dual drive

—lower-cost, small-capacity SSD used in conjunction with

a low-cost, high-capacity hard disk drive (HDD)

—or a solid state

hybrid drive (SSHD) to provide a high-performance, cost-effective
storage solution.

OROM UI Normal Delay

Enabled, Disabled

Select the delay time of the OROM UI Splash Screen in a normal
status

RST Force Form

Enabled, Disabled

Enable Disable Form for Intel Rapid Storage Technology

System Acceleration

Enabled, Disabled

Enable Disable System Acceleration with Intel Optane Memory
Feature

Summary of Contents for COM Express MSC C6B-SLH

















































































































































Search results

Summary of Contents for COM Express MSC C6B-SLH

Reviews:

Related manuals for COM Express MSC C6B-SLH

Brands by name

Popular brands

Avnet COM Express MSC C6B-SLH, User Manual

Search results

Summary of Contents for COM Express MSC C6B-SLH

Reviews:

Related manuals for COM Express MSC C6B-SLH

Brands by name

Popular brands