Avnet COM Express MSC C6B-SLH User Manual Download Page 141

Page: 141 / 144

MSC C6B-SLH

MSC C6B-SLH User Manual

141 / 144

======================================================================

License

--------

This software may be distributed, used, and modified

under the terms of BSD license:

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are

met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. Neither the name(s) of the above-listed copyright holder(s) nor the

names of its contributors may be used to endorse or promote products

derived from this software without specific prior written permission.

Summary of Contents for COM Express MSC C6B-SLH

















































































































































Search results

Summary of Contents for COM Express MSC C6B-SLH

Reviews:

Related manuals for COM Express MSC C6B-SLH

Brands by name

Popular brands

Avnet COM Express MSC C6B-SLH, User Manual

Search results

Summary of Contents for COM Express MSC C6B-SLH

Reviews:

Related manuals for COM Express MSC C6B-SLH

Brands by name

Popular brands