manualshive.com logo in svg

AvMap GeoPilot plus, User Manual

Share
Download
AvMap GeoPilot plus User Manual Download Page 73

73

all other heading, bearing and Track computations are based on the user-selected reference. The 

default setting is Magnetic.

14.5.9 Coordinate System

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’ + “COORDINATE 

SYSTEM” + ‘ENT+ ’

Sets the display of the Latitude/Longitude coordinates system among:

DDD MM SS

 

(Degrees, Minutes, Seconds)

DDD MM.mm

 

(Degrees, Minutes - to two decimals)

DDD MM.mmm

 

(Degrees, Minutes - to three decimals)

UtM, oSGB

The default setting is DDD MM.mm.

14.6 DAtE & tIME SEt-UP

These functions control how the GEOPILOT displays time and date settings.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “DATE & TIME SETUP” + ‘ENT’

14.6.1 time Format

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “DATE & TIME SETUP” + ‘ENT’ + 

“TIME FORMAT” + ‘ENT’

Using the cursor key select the desired setting and press ‘ENT’.

Time can be displayed as 4/UTC (Zulu time), 1 hour or 4 hour local time. The default setting is 

4/UTC. If you select a local time display, continue with the next step.

14.6.2 Local time Difference

If you select local time above, you must key in an offset from UTC. The correct time difference must 

be entered to calculate the local time.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “DATE & TIME SETUP” + ‘ENT’ + 

“LOCAL TIME DIFFERENCE” + ‘ENT’

After pressing ‘ENT’ a window appears; using the cursor key, select the difference between local 

time and UTC to the nearest 30 Minutes. Press ‘ENT’ to activate.

Note 

If you are unsure what the time difference is for your area, get a position fix using the UTC format. Display the 
Location page and note the displayed time. Compare UTC to your local time and note the difference. Key in the 
difference as hours and minutes to the nearest half hour, using a negative value if you are in the western hemisphere 
(for example, the difference in New York is -5 hours, or -4 hours on Daylight Savings Time).

 

14.6.3 Data Format

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “DATE & TIME SETUP” + ‘ENT’ + 

“DATE FORMAT” + ‘ENT’

Summary of Contents for GeoPilot plus






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands