manualshive.com logo in svg

AvMap GeoPilot plus, User Manual

Share
Download
AvMap GeoPilot plus User Manual Download Page 67

67

WIDth

 - the width of the screen is displayed.

Use the cursor key to select and ‘ENT’ to accept. The default setting is Bar.

14.1.3 Language

Selects the language in which you wish menu information to be displayed (i.e. screen labels, menus 

and options). Map detail will remain in English.

>  ‘MENU’  1  sec.  +  “SYSTEM  SETUP”  +  ‘ENT’  +  “GENERAL  SETUP”  ‘ENT’  + 

“LANGUAGE” + ‘ENT’

Use the cursor key to select and ‘ENT’ to accept. The default setting is English.

14.1.4 Military Frequency

The display of Military Frequency data can be set to ON or OFF (this data is found in European 

Database cards).

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “GENERAL SETUP” + ‘ENT’ + “MILITARY 

FREQUENCY” + ‘ENTER’

Use the cursor key to select and ‘ENT’ to accept. The default setting is Off.

14.1.5 Airspaces Level

Sets the Altitude value that conditions the air spaces display if MOVING MAP

MENU -> AIRSPACE SETTINGS -> DISPLAY AIRSPACES is set ABOVE or BELOW.

If DISPLAY AIRSPACES is set ALL , AIRSPACE LEVEL is irrelevant.

14.1.6 terrain Legend

Enables/Disables the legend box in the lower left corner of the display when in the MOVING MAP 

MENU any of the TAWS features is selected. one of the R-A-M mounting options.

14.2 FIX SEt-UP

The Fix Setup sub-menu contains options relating to GPS data input and display.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’

14.2.1 Fix Source

The  GEOPILOT  uses  positioning  information  provided  by  the  internal  GPS-receiver  or  by  an 

external NMEA 0183, external Air Data, or External RNAVdata string.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “FIX SOURCE” 

+ ‘ENT’

Use the cursor key to select and ‘ENTER’ to accept. When connecting the GEOPILOT to an external 

source, be sure the data output of the external device is set for the correct format (see Sec. .5). 

The default setting is Internal GPS.

14.2.2 Differential Correction Source

The GEOPILOT can be connected to a DGPS Beacon Receiver that sends RTCM-104 data. To select 

the Differential Correction source:

Summary of Contents for GeoPilot plus






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands