manualshive.com logo in svg

AvMap GeoPilot plus, User Manual

Share
Download
AvMap GeoPilot plus User Manual Download Page 69

69

within this circle an alarm sounds and the Waypoint Arrival box appears on screen.

To set this alarm:

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “ALARM SETUP” + ‘ENT’ + “ARRIVAL 

ALARM RADIUS” + ‘ENT’

After pressing ‘ENT’ a box will appear with 00.00. Using the cursor key select the number desired 

and press ‘ENT’. The default setting is Off (00.00).

14.3.2 XtE Alarm range

Specifies the distance your Cross Track Error (XTE) can vary before the sound of an alarm.

To set this alarm:

>  ‘MENU’  1  sec.  +  “SYSTEM  SETUP”  +  ‘ENT’  +  “ALARM  SETUP”  +  ‘ENT’  +  “XTE 

ALARM RANGE” + ‘ENT’

After pressing ‘ENT’ a box will appear with 00. Using the cursor key select the number desired and 

press ‘ENT’. The default setting is Off (00).

14.3.3 Waypoint Alarm radius

Specifies the radius of a circle around the User Waypoint: when your aircraft reaches a point within 

this circle an alarm sounds and the Waypoint Alarm box apprears on the screen.

Note 

The alarm is only active for User Waypoints with this symbol selected for the icon: “alarm logo”.

 

To set the alarm:

> ‘MENU’ 1 sec + ‘MENU’ + “ALARM SETUP” + ‘ENT’ + “AIRSPACE AHEAD ALARM” 

+ ‘ENT’

After pressing ‘ENT’ a box will appear with 00.00. Using the cursor key, select the number desired 

and press ‘ENT’. The default setting is OFF (00.00). After pressing ‘ENT’ a window is displayed. 

In this files the 00.00. default value is set. Choose a parameter moving the arrows keys and press 

‘ENT’ to confirm.

14.3.4 tAWS Alarm

Enables the TAWS alarm.

Note 

Vertical  “ALRM”  string  appears  at  the  right  down  edge  of  the  TAWS  Legend  BOX  when  the  TAWS  Alarm  is 
enabled.

 

14.3.5 Airspace Ahead Alarm

If your projected track will cross an airspace sector, an alarm will sound and a warning box will 

appear on the screen. If there is an altitude limitation to the airspace, we will display an alarm if 

your current altitude is within 500 feet of the limitations. To set the time interval for the alarm:

> ‘MENU’ 1 sec + “ALARM SERUP: + ‘ENT’ “AIRSPACE AHEAD ALARM” + ‘ENT’

After pressing ‘ENT’ a box will appear with 00.00. Using the cursor key, select the number desired 

Summary of Contents for GeoPilot plus






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands