manualshive.com logo in svg

AvMap GeoPilot plus, User Manual

Share
Download
AvMap GeoPilot plus User Manual Download Page 17

17

2  thE BASICS 

This chapter provides general information about the functions of the keys and entering data.

2.1  thE KEYBoArD

The GEOPILOT has 11 keys, which access and control features. Some keys perform different tasks 

based on the operation mode. A quick key guide is displayed at the bottom of many menus for 

easy reference.

Below we indicate the keys in capital letters enclosed between single inverted commas, for example 

‘MENU’.  When  a  key,  for  example  ‘MENU’,  must  be  pressed  and  held  down  for  more  than  1 

second it is shown as ‘MENU’ 1 sec.

the Power key

‘POWER’: press and hold to turn the GEOPILOT On.

‘POWER’ 3 seconds: (once powered On) depressing the key for 3 seconds turns the GEOPILOT 

Off.

‘POWER’: (hold & release) once the GEOPILOT has been turned On, the Brightness and Contrast 

Menu appears in the display.

the hSI Key

Allows the user to view the HSI full page view easily.

the Near key

Displays a list of the 14 nearest nav-aid database objects relative to fix position or cursor position (if 

no fix is available). Press and hold to enter the NavData Page.

the Info key

Displays AvMap attribute information for the object under the cursor.

the Zoom-out key

Shows less detail of a larger area by changing the chart scale and zooming out on the map display.

the cursor key

Moves the cursor on the Moving Map, quickly and accurately. Also scrolls to the desired options 

in menu page(s).

the Zoom-In key

Shows  more  detail  of  a  smaller  area  by  changing  the  chart  scale  and  zooming  in  on  the  map 

display.

the Esc key

Cancels an action, closes a window or activates Home or Auto Zoom mode.

the Ent key

Selects the desired option or confirms selection. Also opens the Cursor/Position Menu.

the Goto key

Activates a Flight Plan to the cursor position (in Moving Map mode) or to selected object (in other 

modes).

the Menu key

‘MENU’: selects the Moving Map Menu.

Summary of Contents for GeoPilot plus






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands