manualshive.com logo in svg

AvMap GeoPilot plus, User Manual

Share
Download
AvMap GeoPilot plus User Manual Download Page 72

7

14.5.3 Altitude Unit

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’ + “ALTITUDE” 

+ ‘ENT’

Altitude measurements can be displayed in Feet (FT), Meters (MT) or Flight Levels (FL). The default 

setting is Feet. It is possible for the altitude to be displaied negative. Please

Note: This may be due to the imprecision of the GPS engine vertical calculation. Caution should be 

exercised; do not rely on GPS derived altitude.

14.5.4 Depth Unit

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’ + “DEPTH” 

+ ‘ENT’

Depth measurements can be displayed in Feet (FT), Fathoms (FM) or Meters (MT). The default 

setting is Feet.

14.5.5 Fuel Unit

Fuel units are used in the Fuel Consumption Calculator.

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’ + “FUEL” + 

‘ENT’

You may select Gallons (GAL), Liters (LIT), Kilograms (KG), Pounds (LB) or British Gallons (BGAL). 

The default setting is Gallons.

14.5.6 vertical Speed

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’ + “VERTICAL 

SPEED” + ‘ENT’

The Vertical Speed is used in the Vertical Navigation calculation. It can be displayed as Feet per 

Minute  (FT/MIN)  or  Meters  per  second  (M/S)  or  Degrees  (DEG).  The  default  setting  is  Feet  per 

Minute.

14.5.7 temperature

>  ‘MENU’  1  sec.  +  “SYSTEM  SETUP”  +  ‘ENT’  +  “UNITS  SETUP”  +  ‘ENT’  + 

“TEMPERATURE” + ‘ENT’

The Temperature is used in the Wind Calculation. You may select Fahrenheit (F) or Celsius (C). The 

default setting is Celsius.

14.5.8 North reference

> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “UNITS SETUP” + ‘ENT’ + “NORTH 

REFERENCE” + ‘ENT’

The North Reference for calculations can be shown as Magnetic or True (Magnetic uses an automatic 

adjustment for local magnetic variation).

The North Reference used for wind computations and runway information is always Magnetic; 

Summary of Contents for GeoPilot plus






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands