Group Call
FRITZ!X USB – 7 FRITZ!X USB Operation
67
7.13 Group Call
FRITZ!X USB’s “Group call” feature allows you to ring all other
extensions at the same time. To do so, you must first
configure the extension for internal dialing. Your call is
connected with whichever extension answers first.
Group calls can be enabled or disabled for each extension
individually.
7.14 Suspend/Resume
The “Suspend/Resume” feature, also known technically as
“Terminal Portability”, allows you to suspend an existing
connection and resume it at another point on the S
0
bus. The
connection can be resumed at a different ISDN terminal device
( such as an ISDN telephone) that is connected to your BRI line
alongside FRITZ!X USB.
To suspend a call, proceed as follows:
You will hear an acknowledgment signal to indicate that the
call has been successfully suspended. If you hear the failure
signal, this may indicate that you made a mistake, or that the
N
Pick up the handset.
9
Instead of an extension number, dial “9”. All
extensions that are not busy ring.
P
You are talking to Caller No.1.
R
Press the Hold button. Call No. 1 is now suspended.
s1
PC
s
Dial the sequence shown at left, replacing “PC”
with the parked-call ID. The parked-call ID can be
any number between 0 and 99. You will need to
enter this ID again when you resume the call.
F!XUSB-e.book Seite 67 Mittwoch, 8. November 2006 2:23 14
