Restoring Factory Settings
FRITZ!X USB – 6 Configuring FRITZ!X USB
55
Restoring Factory Settings
If you have not yet configured any settings for FRITZ!X USB,
the factory settings are active (see the section “Factory
Settings” on page 45).
If you have configured settings for FRITZ!X USB and would
like to restore the factory settings, proceed as follows:
1.
Click “Load Factory Settings...” from the “Tools” menu.
2.
Confirm that you want to remove the selected
component by clicking on “Yes” at the safety prompt.
This activates the factory settings in FRITZ!X USB and
loads them to your computer. This operation may take
several seconds.
Please note that restoring the factory settings deletes all the
configuration settings made for FRITZ!X USB, both in the PBX
and in your computer. This operation cannot be reversed!
Re-loading the “Factory Settings” using the FRITZ!X
Configuration software will not affect the selected national
setting of your PBX, as described in the COUNTRY_
SETTINGS.PDF on the istallation CD.
F!XUSB-e.book Seite 55 Mittwoch, 8. November 2006 2:23 14
