Adjusting the Hold Button Function
FRITZ!X USB – 7 FRITZ!X USB Operation
69
To enter a keypad message on an extension without automatic
outside dialing:
7.16 Adjusting the Hold Button Function
Be sure to set the function of the hold button on your analog
terminal devices. Flash times from 80 ms (short flash) to 310
ms (long flash) are supported.
See the operating instructions accompanying your terminal
equipment.
7.17 Using Pulse-Dialing Telephones With
FRITZ!X USB
Only some of the features of FRITZ!X USB can be used with a
pulse-dialing telephone. The following functions are
accessible from a pulse-dialing telephone:
z
external dialing
z
internal dialing (unless automatic outside dialing is
enabled)
z
answering internal and external calls
z
answering waiting calls by dialing “0”
z
alternating between calls by dialing “0”
z
holding calls by dialing “0”
The following operations cannot be performed from a pulse-
dialing telephone:
z
programming FRITZ!X USB
z
picking up a call from another extension
N
Pick up the handset.
0sr
Seq
Dial the sequence shown at left. “Seq” stands for
the keypad message you received from your ISDN
provider.
F!XUSB-e.book Seite 69 Mittwoch, 8. November 2006 2:23 14
