Call Waiting
58
FRITZ!X USB – 7 FRITZ!X USB Operation
7.3 Call Waiting
Activate the “Call Waiting” feature to be notified during a call
if a second caller is dialing your line. An acoustic signal in
your telephone handset notifies you that a second call is
waiting. You can accept the connection with the new caller
within 30 seconds. If you ignore the signal, the waiting call is
rejected after 30 seconds.
Call waiting can be enabled or disabled for each extension
individually. For instructions, please see the information in the
section “Assigning Names to the Extensions” on page 48.
R2
To accept a waiting call, dial the sequence shown
at left. Your original call is now on hold.
R1
To return to your original connection, dial the
sequence shown at left.
You can also accept to the waiting call by hanging
up your existing connection, i.e., by hanging up the
handset. In this case the phone rings as soon as
you have hung up. Pick up the handset again to
accept the waiting call.
R0
To reject a waiting call, dial the sequence shown at
left.
F!XUSB-e.book Seite 58 Mittwoch, 8. November 2006 2:23 14
