background image

Latest products and information available at www.avlite.com

37

AV-426-ICAO 

Radio Controlled Solar Aviation Light

Safe Battery Handling

Charging and Discharging

•   Always ensure batteries are fully charged when installing new lights. The light will be dispatched 

from the Avlite factory fully charged. However if time has elapsed between dispatch and 

installation, battery voltage must be checked. 

•   Never short-circuit or reverse polarity a battery, damage to the battery and device may occur, and 

there is a risk of fire. 

•   Do not use different types of batteries in the same battery assembly. Sealed lead acid and NIMH 

do not mix.

•   If the battery has been deep-discharged, a prolonged charging time is required to bring the battery 

back to full capacity.

Storage

•   Always store batteries in a cool, dry place.
•   After long storage, it is desirable to cycle (charge/discharge) the battery 3 times to restore full 

capacity.

•   Do not mix batteries with metal objects during storage or transportation to avoid accidental short-

circuit.

•   Do not store large quantities of batteries in a densely packed condition when they are in a charged 

or partially charged state.

Battery Handling

•   Do not incinerate or dismantle batteries. Cell components are corrosive and may be harmful to skin 

and eyes.

•   Do not pull on battery lead wires or connector. Excessive force on the leads or connectors can 

damage the welding joints or other connections.

•   Batteries are recyclable. Please dispose of properly.

Summary of Contents for AV-426-ICAO














































Reviews: