Latest products and information available at www.avlite.com
19
AV-426-ICAO
Radio Controlled Solar Aviation Light
Using the Radio Control to Activate the
Airfield Lighting System (ALS)
The Radio Controller is very easy to use and by reading through the How To section below, all of the
advanced features will be well within your grasp.
Make sure that all the lights in the same Light Group.
Turn All the Lights ON
• Turn the Radio Controller On
• Use the arrow keys to adjust the operational Mode to
ON
• Press
MENU
button once to reach
Light Group
• Set the Light Group to ALL
• Press
SEND
button
• Every radio light within range of the control unit will now turn on.
Setup the Lights to Operate in DUSK till DAWN mode
• Turn the Control unit On
• Use the arrow keys to adjust the operational Mode to
DUSK till DAWN
• Press
MENU
button once to reach
Light Group
• Set the Light Group to ALL
• Press
SEND
button
• Every radio light within range of the control unit will now turn on at night, during the day the lights will
turn off automatically.
Runway B Only is to be HIGH Intensity, but Runway A will Remain in Current
Configuration
• On Runway A, set the light group to 0 (follow the instruction in Section 2 in the ‘Radio Control System
Setup’ section of this manual.
• On Runway B, set the light group to 1 or any group different to Runway A.
.
• Turn the Control unit On
• Use the arrow keys to adjust the operational Mode to
Always
On
• Press
MENU
button to reach
Light Group
• Set the Light Group to 1
• Press
MENU
button to reach
LED Intensity
• Use the arrow keys to adjust the LED Intensity to
HIGH
• Press
MENU
button to reach
Advanced Operation Mode
• Use the arrow keys to select
Visible LEDs
• Press
SEND
button
- Runway A will not change state.
- Runway B will now be High Intensity.
