Latest products and information available at www.avlite.com
11
AV-426-ICAO
Radio Controlled Solar Aviation Light
Radio Control System Setup
Your radio control system has been shipped preprogrammed with a default 128 bit encryption key.
It is not necessary to alter the default encryption key, however, if required the encryption key can be
changed (see Secion 1.5. i).
Note: If you change the radio control encryption key in Section 1, it will be necessary to change
the encryption key in ALL the lights in the system
To ensure trouble free set up of the Radio control System it is necessary to step through the following
set up procedures. The setting up of the Radio control system is divided into 3 sections
Section 1
- Programming the Radio Control System (must be done before Section 2 and 3)
Section 2
- Programming the light, using a direct cable connection
Section 3
- Operating the lights using the controller
Section 1
Programming the Radio Control System
1.
Fold out the aerial on the top of the ALS 2.4 GHz Handheld Radio Controller.
2.
Turn on the ALS 2.4GHz Handheld Radio Controller by actuating the red rocket switch on the side
of the controller
3.
Press and hold the menu button for 3 seconds
4.
The screen will display the following massage:
5.
The Menu contains the following Sub menu
(Press the Menu button to step between the menu items)
a. [Screen back light]
Using the [UP] or [DOWN} keys select from:
[0-100%]
b. [Connection Method]
Using the [UP] or [DOWN} keys select from:
[Radio Control]
- standard wireless connection
[Direct Connection]
- use for programming light
