Latest products and information available at www.avlite.com
23
AV-426-ICAO
Radio Controlled Solar Aviation Light
Flash Code
This key sets the flash code on the light.
Example Key sequence:
This sets the flash code to value 123. The light responds by flashing the flash code value.
Flash Code Numbers
The lamp flashes numbers as follows: Hundreds, Tens, Ones. A value of 125 will be flashed as: 1 flash,
followed by a delay, 2 flashes, followed by a delay, 5 flashes.
The flash for number 0 is one long flash.
For example if the current Flash Code is set to 51 via the AB switches, the lamp will flash number 081.
For a flash code set to 01, the lamp will flash 001.
Intensity
This function sets the light intensity. Valid intensity values are 1 for Low, 2 for Medium, 3 for Medium-
high and 4 for High.
Example Key sequence:
This sets the light intensity to Low.
Battery Status
This function reads the battery status. The response from the light is High Voltage: 4 flashes,
Good Voltage: 3 flashes, Low Voltage 2 flashes, Cutoff Voltage or below: 1 flash.
Example Key sequence:
