Latest products and information available at www.avlite.com
18
AV-426-ICAO
Radio Controlled Solar Aviation Light
h. Sync Mode (If Enabled during Radio Control System Programming- Section 1)
Using the [UP and [DOWN] keys select from the following:
[Full] (Use for Flare Path or Approach sequence)
[Basic] (Use for synchronised Flashing)
[Disabled]
i. Diagnostic
For the following diagnostic tests to following diagnostic flash results can be displayed for the light.
Using the [UP and [DOWN] keys select from the following
[Node Sub Net]
Pass= Confirms light is a node on the Sub Network
[Node Main Net]
Pass= Confirms light is a node on the Main Network
[External Power]
Pass= Confirms external power is connected via HVPS
[Battery Flat]
Pass= Confirms battery voltage is under 10.5 Volts
[Battery Low]
Pass= Confirms battery voltage is between 10.5 and 12.5 Volts
[Battery Healthy]
Pass= Confirms battery voltage is over 12.5 Volts
Press [Send] to receive a diagnostic flash sequence
When the controller is in operation mode, multiple changes can be set and sent at the same time. It is
not necessary to press send after each change.
(1 x 1 second flash)
(2 x 300 milli second flashes)
