User
’s Manual
7-39
Punch
Hole
Removal
You can remove punch holes from the output scanned image when
scanning punched document. Note the availability of this feature varies
depending on your scanner model.
Punch holes can not be removed when:
Resolution is set lower than 150dpi
The hole is near the edge of the document
The holes are not aligned along the edge of the document
Punch Hole Removal is available only when “Auto Crop” is enabled. If
either “Fixed to Transport”, “EOP (End of Page) Detection”,
“Automatic Multiple”, “Relative to Documents” is selected from the
Cropping option on the Paper tab, the Punch Hole Removal option
will be disabled.
Shadow Removal
When
「
Flatbed
」
on the
「
Scan Source
」
option is selected
on the
「
Image
」
tab, the
「
Shadow Removal
」
option will be
enabled. Click to remove the shadow on the book spine when
scanning a book.
Before Shadow Removal
After Shadow Removal
Original
Output image
