User
’s Manual
7-33
Notice when scanning long page document:
1.
Pull out the extension in the ADF Paper Tray.
2.
Secure enough space around the Output Tray to prevent the ejected paper from falling
off the Output Tray.
3.
To ensure the performance, in color mode, set the resolution to be 300 dpi or lower; in
Black and White mode, set the resolution to be 600 dpi or lower.
4.
Depending on your system environments, application, or your specified paper size, there
may be insufficient memory to perform scanning.
OverScan
Overscan allows you to add a specific margin at top and bottom or right and left (Options
vary based on the type of scanner) of the edge of the image. This is used to reduce possible
corner clipping on the skewed images and often applied to a batch of skewed document to be
scanned in the auto document feeder. Select a value between 0 and +5 mm. Note the
overscan result will not be shown in the Display window and that the availability of the
function varies based on type of scanner.
Pre-Feed
Choice: Enable, Disable. If enable is selected, you can set the amount of time the scanner
starts pre-feeding your paper after your documents has been loaded into the feeder. The
default is disabled. Note: The availability of this option varies due to scanner model.
Transport Timeout
Set the amount of time the scanner will wait and then start auto scan after the first scan job
is completed. If you have many separate documents need to be scanned at the same scan
settings, this feature is especially useful. The default is 0. The value ranges from 0 to 30
seconds.
N
OTE
:
Within the specified timeout period, if you load your document to the
feeder, the scanner starts scanning automatically.
If your scanner has a flatbed option and you place your paper on the
flatbed, after the timeout period, you need to click the Scan button on the
TWAIN user interface to start scanning.
