49
3.
The scan options in Scancast are the same with those in E-mail or Filing. Tap the
[Change] button to update scan options. Refer to Section Change More
E-MAIL Settings or Chapter 5 Customizing Scan Options to configure your
favorite scan options for Scancast.
4.
Tap either the [Start] button
on the touch panel or the [Scan] button
on the control panel.
5.
The product starts scanning and the preview image will be displayed.
6.
On the Preview screen,
z
If the scanned image is OK, press the [Start] button (
)
on the touch
panel or the [Scan] button (
) on the control panel to distribute the
scanned image. You may also insert more pages by taping the [Insert
Pages (
)] button on the bottom of the screen.
z
If the scanned image is not OK, tap the [Cancel] button to abort the job.
7.
The scanned document is temporarily saved to the product’s memory.
8.
The [Scancast] window for multiple destinations appears on the touch panel,
prompting you to choose a destination, as shown below:
9.
Select and tap one of destinations (Public Folder/USB Flash/E-mail/Filing/Copy)
you want your scanned document to send to, and then tap OK.
10.
The scanned documents are sent to your selected destination while the
document images remain in the product’s memory until deleted from Step 13.