manualshive.com logo in svg

Avision DT-1214H, User Manual, Page: 105 / 135

Share
Download
Avision DT-1214H User Manual Download Page 105

     

                                                     

 

99

 

910019 

110172 
110173

 

Connection failure 

 

 

 

 

 

Ping the IP address of the product from 
another PC in DOS prompt.    For 
example, type “Ping 10.1.20.144” in Dos 
prompt.    If the product has no response, 
then perform the following steps. 
1.

 

Check if the RJ-45 connector is firmly 
plugged-in. 

2.

 

Check the Ethernet cable. 

3.

 

Check the product’s IP address. 

4.

 

Check the destination IP address. 

5.

 

Check Subnet Mask. 

6.

 

Check Gateway IP. 

 

110176 

Back to home 
position error 

Home position sensor fails. Contact the 
service personnel to replace the sensor or 
main board. 

110178 

Lamp failure 

Restart and try again. If this error still 
happens, contact the service personnel to 
replace the lamp. 

110179 

Scanner lock 

Move the scanner lock to the “unlock” 
position. 

 

Summary of Contents for DT-1214H








































































































































Reviews:

No comments