Avision DF-1004S User Manual Download Page 63

Page: 63 / 130

User’s Manual

Detection Area
This option allows you to specify a multi-feed detection area.
To specify a multi-feed detection area,
1.

Choose Disable from the Intelligent Mode. The Detection

Area will be enabled.

Choose Inside the Range or Outside the Range. The

detection area will be highlighted.

Drag your mouse pointer on the top or the bottom of the

detection area to specify your area in the display window.

Or you may use the up and down arrow key of the Top

and Bottom to change its size. The Top indicates the

starting position of the detection range. The Bottom

indicates the ending position of the detection range. Note

the top value and the detection range has to be at least 1

inch.

Detection Area: Inside the Range, Box, Top: 3”, Bottom: 7”

4-41

Summary of Contents for DF-1004S



































































































































Search results

Summary of Contents for DF-1004S

Reviews:

Related manuals for DF-1004S

Brands by name

Popular brands

Avision DF-1004S, User Manual

Search results

Summary of Contents for DF-1004S

Reviews:

Related manuals for DF-1004S

Brands by name

Popular brands