Avision AD345G Series User Manual Download

Page: 162 / 183

User’s Manual

8-10

Warning:



Do not interrupt the calibration sequence or try to shut off

the device while it is calibrating. If you stop the calibration

before it has completed, a calibration error may occur. As a

result, when you next power up the unit, an error message

may be displayed, and you will have to power off the unit

and repeat the instructions in this section.



Calibrate the scanner only when color of the scanned image

looks abnormal.



Keep the calibration sheet from dust and debris. Any dirt

may make the calibration chart invalid or impact the

calibration result.



Use only the included calibration sheet to calibrate the

scanner.

Summary of Contents for AD345G Series
























































































































































































Search results

Summary of Contents for AD345G Series

Reviews:

Related manuals for AD345G Series

Brands by name

Popular brands

Avision AD345G Series, User Manual

Search results

Summary of Contents for AD345G Series

Reviews:

Related manuals for AD345G Series

Brands by name

Popular brands