Avision AD345G Series User Manual Download

Page: 135 / 183

User’s Manual

5-1

ISIS Interface Operation

* Please refer to the preceding chapter, Scanner Installation, to

install ISIS scanner driver. You may start the supplied QuickScan

software application to scan via the ISIS user interface.
The ISIS driver operation method is similar to the TWAIN’s.

Every function on the ISIS interface screen is briefly described as

below:

Mode:

Select one of scan modes, including B&W, gray, color

options.

Dither:

5 halftone levels available, can be disabled.

Dots per inch:

Select your desired resolution.

Paper Size:

Select your desired paper size.

Brightness:

Adjust your scan image brightness or darkness.

Contrast:

Adjust the range between the darkest and the lightest

shades in the image.

Default:

Click to reset all settings.

Area:

Select your desired scan area or position.

Summary of Contents for AD345G Series
























































































































































































Search results

Summary of Contents for AD345G Series

Reviews:

Related manuals for AD345G Series

Brands by name

Popular brands

Avision AD345G Series, User Manual

Search results

Summary of Contents for AD345G Series

Reviews:

Related manuals for AD345G Series

Brands by name

Popular brands