Enabling Analytics on an ENVR2 Plus Appliance
To enable analytics processing on the video streams from cameras connected to the ACC site to be done by
the ENVR2 Plus Appliance:
1. Open the ACC Client software and log in to the ENVR2 Plus Appliance.
2. In the New Task menu
, click
Site Setup
.
3. Select a server, then click
Server Analytics
.
4. Select an analytics feature tab and then select the cameras to enable the feature on:
l
Classified Object Detection (requires ACC7-VAC licenses)
l
Appearance Search (requires ACC7-ENT licenses)
l
Face Mask Detection (requires ACC7-ENT licenses)
l
Face Recognition (requires ACC7-FACE licenses)
l
License Plate Recognition (requires ACC7-LPR licenses)
Only cameras that you have access to that have the prerequisite analytics enabled are displayed in
each tab. If you do not see a tab, it could be because your site does not have the required analytics
license.
5. Click in the option box next to a camera to select or deselect the camera to enable analytics
processing by the ENVR2 Plus Appliance for that camera. An estimate of the resource cost is shown
on the left of each camera row.
As you enable (or disable) analytics for cameras, the bars at the bottom update to display the ENVR2 Plus
Appliance's capacity. The percent usage of each analytics feature is displayed using the color of the analytics
feature tab.
To exit the Server Analytics panel, click
Close
.
Setting Up License Plate Recognition
Configuring LPR lanes and settings must be done on the License Plate Recognition page. If the
button
doesn't appear on the Server Setup page, ensure your LPR licenses have been activated. For more
information, see
1. In the New Task menu
, click
Site Setup
.
2. Select the ENVR2 Plus Appliance server, then click
.
The License Plate Lane list is pre-populated with the number of lanes that you have licensed for the
site.
Enabling Analytics on an ENVR2 Plus Appliance
18
