Setting Up the ENVR2 Plus Appliance
Installing the Hardware
Install the ENVR2 Plus Appliance in a location free of dust and particles, vibration, and within the specified
operating temperature range. Otherwise any issues that arise will not be covered by the warranty.
The ENVR2 Plus Appliance can be installed as a stand-alone device, mounted on a wall using the supplied
mounting brackets, or kept in a server rack using the optional Rack Mount Shelf With Sliding Rails accessory
kit (RMS1U-ENVR2-8P), or mounted to a DIN rail using the optional DIN Rail Mount accessory kit (DIN-ENVR2-
8P). Follow the mounting instructions below for the type of mount you will be using.
Tip:
You may want to mount the appliance before or after you have made all the required
connections depending on where you want to mount the device. See
for more information on the required connections.
Mounting to the Wall with the Supplied Brackets
If you are not using the supplied mounting brackets, refer to the instructions for the mounting option you are
using:
l
Mounting with the Optional DIN Rail Mount Kit
l
Mounting with the Optional Rack Mount Kit
Follow these instructions to mount the ENVR2 Plus Appliance with the supplied mounting brackets.
1. Note down the serial number, located on the label on the underside of the device.
2. The wall mounting brackets can be mounted to either the lowest threaded holes on the sides of the
appliance (A) or the highest threaded holes on the sides of the appliance (B), depending on whether
you want to mount the ENVR2 Plus Appliance with the bottom or top towards the wall.
Setting Up the ENVR2 Plus Appliance
7
