Networking
When locating where to install the ENVR2 Plus Appliance in a multi-server deployment, consider the
following items:
l
Before connecting the ENVR2 Plus Appliance, install the latest ACC Client software package on the
ACC Client PC.
l
At initial setup time, the ACC Client PC must have network access to the ENVR2 Plus Appliance. After
a multi-server site is created, the ACC Client PCs require network access to at least one site member.
For more information, see
.
l
Install the ENVR2 Plus Appliance so that it can communicate over the network with all the ACC Site
member servers.
l
Do not connect cameras to the ENVR2 Plus Appliance until after the appropriate network
configuration has been set up.
Passwords
The first time you start the ENVR2 Plus Appliance you must create new administrator passwords for both:
l
The ACC Site running on the ENVR2 Plus Appliance.
l
The Server Management page running on the ENVR2 Plus Appliance .
Without these passwords the ENVR2 Plus Appliance can only be brought back into service by resetting it to
its default state as it was when first delivered — all recorded data, updates made to the ACC Server software,
and all configuration settings are lost and cannot be restored.
Certificate Management
By default, the ENVR2 Plus Appliance is configured with a self-signed certificate, which generates a
connection warning in the web browser. Organizations that deploy their own PKI can use the Certificates
pane of the Server Management page to manage certificates on the device. For more information, see
Package Contents
Ensure the package contains the following:
l
Avigilon Video Appliance
l
Power cord
l
Power supply and screwdriver to secure it
l
Wall installation hardware
l
2 x wall mount brackets
l
4 x M4x5L bracket mounting screws
l
4 x wall mounting wood screws
l
4 x plastic drywall anchors
Networking
3
