Avidyne IFD540 Pilot'S Manual Download Page 231

Page: 231 / 334

5-3

Navigation

Integration

Category

Description

IFD Functionality

40/50, etc.)

commands to set
course (e.g. “auto-
slew”) on those
external device(s).

available states.

Nav source modes
available:

GPS,
VLOC,
GPS

VLOC,

OBS,
OBS

VLOC.

“Cooperative”
electronics

The “cooperative”
system is even
more capable than
the IFD and
therefore is the
primary navigation
control device.

All nav source
selection and
course setting is
performed on the
external device.

The IFD becomes a
“slave” to the
external device.

Course values will
display on the IFD
but are set on the
external device(s).

Nav source modes
available:

None (the nav
source knob will
appear to be non-
functional).

Summary of Contents for IFD540















































































































































































































































































































































Search results

Summary of Contents for IFD540

Reviews:

Brands by name

Popular brands

Avidyne IFD540, Pilot'S Manual

Search results

Summary of Contents for IFD540

Reviews:

Brands by name

Popular brands