Avidyne IFD540, Pilot'S Manual

Page: 19 / 334

System Overview 1-11
START-UP SEQUENCE
The startup sequence of the IFD is as follows:
•
A splash screen will be displayed during system
initialization and will be automatically removed
when the IFD is initialized. The Page Function
keys (e.g. FMS, MAP, AUX) will not be lit up while
the splash screen is present;
•
An agreement of the limitation of your legal rights
must be made via the bezel “ENTR” button. Note:
For the duration that the agreement page is
displayed, the IFD is activating the signals that
connect with a remote annunciator panel as well
out outputting self-test data to external devices.
Use that condition as a lamp test and external
signal check;
•
A software version and database currency page is
displayed IF there any expired databases.
Avidyne does not recommend operating with
expired databases but the system will allow
operation by pressing the “Proceed” followed by
the “Confirm” LSKs;
•
If the IFD has been enabled for Bluetooth and
WiFi and either has been configured “On” on the
User Options page, then the IFD will present an
Allow/Ignore page to allow external data receipt
via Bluetooth and/or WiFi. Press the Allow button
if such input is desired or the Ignore button if no
external input is desired. Pressing Ignore will
automatically toggle the User Option selections to
Off and will remain that way until manually turned
back on;
•
If there is a fuel flow system connected to the IFD,
then the IFD will automatically transition to the
Fuel Management Page. If the fuel flow system
does not provide fuel totalizer data, you will need
to input the fuel on board and press the “ENTR”
key. If the fuel flow system does provide fuel
totalizer data, confirm the total is correct and press
the “ENTR” key.