Avidyne IFD540 Page 230 Pilot'S Manual Download

Page: 230 / 334

5-2

Navigation

Integration

Category

Description

IFD Functionality

a procedure, etc).

Nav source modes
available:

GPS,
VLOC,
GPS

VLOC,

OBS,
OBS

VLOC.

Basic electro-
mechanical nav
indicator

There is at least
one external CDI or
HSI in the airplane
and the IFD has
access to the
course data from it.

Set the course on
the external unit
and the IFD will
display that value.

No auto-slew
capability of the
course on the IFD.

The nav source
knob is basically
just a toggle button
to toggle between
the available states.

Nav source modes
available:

GPS,
VLOC,
GPS

VLOC,

OBS,
OBS

VLOC.

“Non-cooperative”
electronics (e.g.
G500/600, Aspen
EFD1000, Avidyne
EXP5000, Dynon
Skyview, EFIS

The IFD can
receive course input
from this external
device(s).

The IFD can send

The nav source
knob is basically
just a mode change
knob to toggle
between the

Summary of Contents for IFD540















































































































































































































































































































































Search results

Summary of Contents for IFD540

Reviews:

Related manuals for IFD540

Brands by name

Popular brands

Avidyne IFD540, Pilot'S Manual

Search results

Summary of Contents for IFD540

Reviews:

Related manuals for IFD540

Brands by name

Popular brands