Avidyne IFD540, Pilot'S Manual

Page: 117 / 334

Map Pages 3-13
NOTE
Rubber Banding Not Functional in SVS View
Rubber banding is not supported in the synthetic
vision view of the flight plan on the SVS tab.
ALTITUDE CONSTRAINTS ON MAP
Any waypoint that has an altitude constraint defined for it in the
flight plan, including all published procedures, will display a
graphical indication of the altitude constraint on the map. The
three types of altitude constraints are:
•
At or Below;
•
At;
•
At or Above
Example Depictions of Altitude Constraints
The altitude constraint depiction will also appear at the proper
geographic position. For example, if an altitude constraint were
defined to be 5nm prior to a waypoint like it is for KGDM in the
image above, the graphical representation of the altitude
constraint on the map will be positioned 5nm prior to the
waypoint, instead of at the actual waypoint.