EN
39
1
2
4
3
6
5
1
Gate position status (display when in
operation) in relation to the magnets
2
Alert setting and operating time prior to
alert
3
Countdown to contact trigger
4
Command trigger button
5
Opening/closing request log
6
Time programming of contact triggers
Press the command trigger button in the app. The
contactor will send the command order to the motor
drive. The opening or closing display will start
within the given deadline. If your motor drive fails to
complete its cycle within the determined operating
time, go to the Alarm setting (2), then close
reminder. Adjust the cycle time of your automatic
gate.
When the determined operating time is exceeded, if
the magnets did not separate during opening, or if
the magnets did not come together during closing,
the app displays this message.
5 - USING THE PRODUCT WITH GOOGLE HOME
NOTE: the name you give your Avidsen Home
devices is the one that will be recognised by
Google Assistant.
Example: if you have a contactor named “gate”,
“OK Google, open gate” will work, whereas “OK
Google, open motor drive” may not trigger
anything.
Google Assistant can help you control your
connected devices.
For example, you can use the following
commands:
- “OK Google, Open gate.”
- “OK Google, Close gate.”
- “OK Google, Open garage.”
- “OK Google, Close garage.”
For more information on device names or creating/
linking a room, please consult Google support.
A word of advice, however. In order to avoid
unwanted commands if you connect several
modules in one area, we recommend that you
avoid using a group name suggested by Google
Home (bedroom, office, living room, etc.) when
naming your command module.
In the event of problems with the Google Home
app or configuration of the device in Google Home,
contact Google support.
The setting up procedure depends on your
smartphone and requires an Internet connection:
E - USE
CONNECTED MOTOR DRIVE KIT WITH ACTUATORS
