EN
38
If the following message comes up:
Click on Changement (Change) or simply connect
your smartphone to the 2.4GHz frequency and then
click Continuer (Continue).
Please wait while the pairing procedure takes
place. This stage can last several minutes.
Your contactor is now operational and will appear
in your app.
You can now control your Avidsen contactor from
your smartphone.
You can rename it by clicking on the small pencil
to the right of the device name (garage by default).
4 - USE VIA THE APP
Warning: Thanks to the position of the magnets,
the contactor can indicate whether or not your gate
is closed. When the app indicates that the gate is
open, it means that the two magnets are no longer
in contact with each other. This does not however
guarantee that the gate is actually completely
open. In the event of faulty operation (e.g.: obstacle
detection, motor error, etc.), if the gate remains ajar
the contactor cannot be held responsible.
IMPORTANT: The dry contact signal is the same
whether the opening or closing of the gate is
triggered. The contactor will take into account the
last command given as well as the position of the
magnets to determine the current command to be
displayed in the app.
However, control logics are specific to each
manufacturer and subject to different settings.
Therefore the contactor does not know exactly the
operating status of the gate motor drive when it is
moving, or what the control logic will require the
motor drive to do when a new command is given.
As a result, it is possible that the gate may move in
the opposite direction to what the app is indicating.
(e.g.: automatic closing activated, motor drive
behaviour after a switch to safety mode, “stop”
command while in motion, control by a third party
device, etc.). In any event, wait until the end of the
app’s display to determine the status of the gate
(closed or not closed).
E - USE
CONNECTED MOTOR DRIVE KIT WITH ACTUATORS
