Avid Technology Pro Tools S6 Master Post Module, Assembling/Disassembling

Page: 28 / 34

Chapter 5: Disassembling and Expanding Leg Frames 25
Removing the Back Corner Brackets
If you are disassembling the Leg Frame to move or expand it, detach or remove the Back Corner Brackets.
To remove the Back Corner Brackets:

Detach the Back Corner Brackets from the legs (see Figure 21) by removing the four fasteners and washers per bracket.
• If you are moving the frame (not expanding it), leave the brackets attached to the Beam and then lift the Beam off the Legs.
• If you are expanding the frame by replacing the Beams, fully detach the Back Corner Brackets from the Beam by removing
the four fasteners and washers per bracket.
Removing the Front and Back Beams
If you are disassembling the Leg Frame to move or expand it, remove the Beams.
To remove the front Beam:
1
Remove the four fasteners and washers per mount that secure the front Beam to the Legs, then lift the Beam off of the Legs (see
Figure 22). If your Leg Frame is an original (early 2014) unit, remove the fasteners from the mounting plate.
2
Repeat for the other Beam.
Figure 21. Removing the Back Corner Brackets from legs (lower left) and from beams (upper left)
Figure 22. Removing the front Beam from the Legs
(Not to scale)
M5x15 (7760-30604-00) Fastener
M5 WSHR (7760-30607-00) Washer
M4 Hex
Tool
(Not to scale)
M8x30 (7760-30606-00)
Fastener
M8 WSHR (7760-30609-00) Washer
6mm Hex
Tool