Avid Technology Pro Tools S6 Master Post Module, Assembling/Disassembling

Page: 26 / 34

Chapter 5: Disassembling and Expanding Leg Frames 23
Detaching Leg Frame Join Modules
To detach Leg Frames that include a Leg Frame Join Module:
1
Detach the left frame from the bracket by removing the eight fasteners and washers (see Figure 18).
2
Repeat for any other pairs of Leg Frames attached to each other with a Leg Frame Join Module.
Removing the End Brackets
If you are adding one or more Leg Frame Extensions to an existing Leg Frame, you only need to remove one or both End Brackets.
To remove the End Brackets:

Remove the eight fasteners and washers per bracket that attach the Left and Right End Brackets to the Legs (see Figure 19).
Figure 18. Detaching the left frame from the Center Bracket
Figure 19. Removing the right side End Bracket (left side End Bracket shown attached)
(Not to scale)
M5x15 (7760-30604-00) Fastener
M5 WSHR (7760-30607-00) Washer
M4 Hex
Tool
(Not to scale)
M5x15 (7760-30604-00)
Fastener
M5 WSHR (7760-30607-00)
Washer
M4 Hex
Tool