Avid Technology Pro Tools S6 Master Post Module, Assembling/Disassembling

Page: 12 / 34

Chapter 2: Initial Disassembly 9
Removing Display Modules
If your M40 system includes Display Modules, remove them next. Otherwise, proceed to “Removing T-Strips” on page 9 .
To remove Display Modules:
1
Disconnect power and Ethernet cables connected to the Display Modules.
2
While holding the Display Module with one hand, remove the four fasteners that secure the first Display Module to its mounting
bracket.
3
Set the Display Module(s) face-down on a flat surface.
Removing T-Strips
To remove T-strips:

Remove the T-strips from between chassis, one at a time. Start at the top (back) of the control surface and use a small flat-head
screwdriver to push down on the tab that holds the T-strip in place, then lift the strip out.
Figure 2. Removing a Display Module from its mounting bracket (side view)
Figure 3. Removing T-strips
Fastener
Tool
M4x10 BCHS
M2.5 Hex