AVGear AVG-UHMS66 User Manual Download Page 25 | Manualshive

Page: 25 / 30

background image

AVG-UHMS66

5.4.2 GUI for TCP/IP control

AVG-UHMS66 provides with built-in GUI for convenient TCP/IP control. GUI allows users to interact with AVG-
UHMS66 through graphical icons and visual indicators.

Type 192.168.0.178 in your browser, it will enter the log-in interface shown as below:

There are 2 selectable usernames – admin (default password: admin) and user (default password: user). Log in
as admin can access more configuration interfaces than user. Enter username and the right password. Here is a
brief introduction to the interfaces.
Main: Interface shown after logging in, provide intuitive I/O connection switching. See the screenshot below:

The button matrix displays every possible connection between every input and output, users can carry on the
connections by clicking corresponding button.

Buttons 1~9 at the right-bottom corner provides quick saving and recall for overall connection status.

Users: Display or modify credential settings, front panel lock, and GUI version.

If there is any modification, press Save to restore the settings, or press Cancel to withdraw.

Interface: Set title bar label, LCD readout, and button labels, press Save to save the settings

«
...
23
24
25
26
27
...
»

Summary of Contents for AVG-UHMS66































Reviews:

No comments

Related manuals for AVG-UHMS66

Brand: DANLERS Pages: 2

Brand: National Instruments Pages: 23

Brand: Intermatic Pages: 1

Brand: PureLink Pages: 10

Brand: AdLuminis Pages: 8

Brand: TRENDnet Pages: 12

Brand: AbleNet Pages: 12

BONANZA ACCU-SIM V35B

Brand: A2A Simulations Pages: 112

FRIENDLYNET FS4116R

Brand: Asante Pages: 6

Brand: Paugge Pages: 20

TEG-S50TXE SHEETS

Brand: TRENDnet Pages: 20

Brand: Planet Pages: 2

Brand: ATEN Pages: 21

Brand: Gefen Pages: 9

SM24-1000SFP-AH

Brand: Transition Networks Pages: 76

Brand: National Instruments Pages: 8

BOCAHUB-16 Plus BEN220

Brand: Boca Pages: 56

Brand: Omron Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands