AVG-UHMS66
5.1.3 Query
Press and hold the button “ENTER” for 3 seconds, it will enter into system query menu. Use Left and Right
direction button to navigate checking the previous/next items.
Function Items
Example
Description
Check the connection
status of inputs
Y means the corresponding port is
connected with input device, N means not.
Check the connection
status of outputs
Y means the corresponding port is
connected with output device, N means not.
Correspondence
between inputs and
outputs
Shows the correspondence between the 6
inputs and 6 outputs.
Check if the input is
with HDCP
Y means the input signal is with HDCP, N
means not.
Check if the output is
with HDCP
Y means the output signal is with HDCP, N
means not.
Check the output
resolution
Use button
to check the 6 output
resolutions separately.
Output check
Press any output button to check its corresponding input.
Example: Check which one is the corresponding input for output 2. (Presume Output 2 corresponds to Input 1.)
Operation: Press Output 2 button, LCD screen display “AV: 1->2 IR: 1->2”, and indicators of input 1 and output 2
turn on and last for 3 seconds. Then output 2 corresponds to input 1.
5.1.4 Clear operation
When you switch an output channel, learn EDID data, or set EDID data, press the Clear button to withdraw the
operation before you press “ENTER” to carry it on. When you press it, the matrix will return to the previous state.
Summary of Contents for AVG-UHMS66
Page 29: ...AVG UHMS66 7 Panel Drawing ...
