AVG-UHMS66
5.2 IR Control
By using IR & HDBaseT transmission technology, the AVG-UHMS66 has the following IR control options:
1) Control far-end output device from local matrix location
2) Control local input/output device remotely.
3) Control the AVG-UHMS66 locally/remotely.
5.2.1 Usage of IR Remote
Standby button, press it to enter/ exit standby
mode
Input channels, range from 1~6 (buttons 7, 8
are not available), corresponding IR signal
switched synchronously when switching input
channels.
Menu buttons, ALL, EDID and CLEAR, same
with the corresponding front panel buttons.
Please refer to 4.1 Front Panel Button
Control for details.
: Navigation buttons.
ENTER: Confirm button.
Output channels, range from 1~6 (buttons 7,
8 are not available).
Each channel has 1 IR IN, 1 HDBaseT, 1
RS232, and 1 AUDIO outputs, and channel
1~4 have HDMI outputs.
Note: With this IR remote, AVG-UHMS66 can be controlled by the built-in IR, the extended IR receiver connected
to the “IR EYE”/”IR ALL IN” and the IR receiver on the far-end receiver.
Summary of Contents for AVG-UHMS66
Page 29: ...AVG UHMS66 7 Panel Drawing ...
