AVG-UHMS66
Please set the parameters of COM number, baud rate, data bit, stop bit and the parity bit correctly, only then will
you be able to send command in Command Sending Area.
5.3.4 RS232 Communication Commands
Baud rate: 9600 Data bit: 8 Stop bit: 1 Parity bit: none
Command
Function
Feedback Example
System Commands
/*Type;
Query the models information.
MHD66TP-N
/%Lock;
Lock the front panel buttons on the Matrix.
System Locked!
/%Unlock;
Unlock the front panel buttons on the Matrix.
System Unlock!
/^Version;
Query the version of firmware
VX.X.X
/:MessageOff;
Turn off the feedback command from the com port. It will
only show simple words like “SWITCH OK!”.
/:MessageOff;
/:MessageOn;
Turn on the feedback command from the com port.
/:MessageOn;
Demo.
Switch to the “demo” mode, convert input and output in
turn like1B1, 1B2, …6B5, 6B6, 1B1… and so on .The
switching interval is 2 seconds.
Demo Mode
Undo.
To cancel the previous operation.
Undo Ok!
Operation Commands
[x]All.
Transfer signals from the input channel [x] to all output
channels
X To All. (X=1~6)
All#.
Transfer all input signals to the corresponding output
channels respectively like 1->1, 2->2…
All Through.
All$.
Switch off all the output channels.
All Closed.
[x]#.
Transfer signals from the input channel [x] to the output
channel [x].
X Through. (X=1~6)
[x]$.
Switch off the output channel [x].
X Closed. (X=1~6)
[x]@.
Switch on the output channel [x].
X Open. (X=1~6)
All@.
Switch on all output channels.
All Open.
Parameter
Configuration area
Monitoring area,
indicates whether
the command sent
Command Sending
area
Parameter
Configuration area
Monitoring area,
indicates whether
the command sent
Command Sending
area
Summary of Contents for AVG-UHMS66
Page 29: ...AVG UHMS66 7 Panel Drawing ...
